Full-tone and tinting paint in intense colours, with very good hiding power. Can be used with dispersion paints or paints based on silicone resin or silicate. Available in 27 different colour tones. All colour tones are water-thinnable and can be mixed amongst each other. For exterior and interior use, weatherproof, excellent washability (class 2 according to DIN EN 13300). Before tinting special paints check compatibility. Free of solvents and harmful emissions.
Colours: Oxidrot, Terracotta, Mandarine, Cognac, Gold, Sonnengelb, Frühlingsgrün, Oxidgrün, Tannengrün, Karminrot, Bordeaux, Aquablau, Azur, Ocker, Oxidbraun, Havanna, Torf, Gotikbraun, Umbra, Schiefer, Schwarz, Blau, Violett, Rot, Orange, Gelb, Grün.
GENERAL
Product description
Charateristics
Suitability of the colour tone / Please refer to the symbol on the lid of the packaging:
for interior use
for exterior use
original material for exterior use only
for silicate ans silicone use
Material
Application Area:
For exterior and interior use on good, solid new and old undergrounds such as stucco, brick-masonry, lime-sandstone. For reworking of solid coatings based on silicate, silicate dispersion, silicone and dispersion.
Binding Agent:
Special resin dispersion
Colour:
Oxidrot, Terracotta, Mandarine, Cognac, Gold, Sonnengelb, Frühlingsgrün, Oxidgrün, Tannengrün, Karminrot, Bordeaux, Aquablau, Azur, Ocker, Oxidbraun, Havanna, Torf, Gotikbraun, Umbra, Schiefer, Schwarz, Blau, Violett, Rot, Orange, Gelb, Grün (for reference see separate Allcolor colour chart)
Content of Solids:
Approx. 59 %
Specific gravity:
1.30 – 1.42 g/cm³
pH value:
Approx. 10
Diluting agent:
Water
Viscosity:
Slightly thixotropic
Application characteristics
Application:
Brush / roller / spray (airless). Do not apply on sun heated substrates, during strong winds, at high temperatures, extremely high humidity, in fog or rain. Consider the risk of night frost. If necessary, protect the façade with suitable scaffolding-nets or tarpaulins.
Underground:
Needs to be clean, dry, and solid. Otherwise use JONAS Hydro-Haft-& Tiefgrund first to consolidate the underground. For underground treatment and application VOB, part C, DIN 18363 and the relavant BFS information must be observed.
Coating build-up:
Priming coat and final coating: use product without dilution.
Spreading rate per coating:
Approx. 140 - 200 ml/m² on smooth underground (if necessary test on the wall).
Application temperature:
At least + 5°C (Degrees Celsius) for air and underground during application and drying.
Drying:
The surface of the coating is dry and can be painted over after 8 - 10 hours (at a temperature of 20 °C and a relative atmospheric humidity of 65 %). High humidity, low temperatures and low air exchange extend the hardening and drying time.
In case of adverse weather conditions always take appropriate actions (e.g. rain protection) to protect work areas and freshly painted surfaces.
Tinting:
Colour stability: weather, humidity, UV-light and accumulations may have an influence on the coating surface. The process of change is dynamic and depends on climate and exposition conditions. The current national regulations, leaflets etc. apply.
Colour accuracy: weather conditions and property conditions have an influence on colour accuracy and the uniformity of colour. The following conditions should be avoided:
a. Irregularly sucking substrate
b. Different surface humidity in the substrate
c. Patches with different alkalinity and / or ingredients from the substrate
d. Direct sunlight with sharp shadows on the still humid coating
Washout of additives: For coatings which are not yet fully dried any water impact, i.e. dew, fog or rain, may washout additives from the coating which then build-up on the surface. The extent of this effect differs, depending on the intensity of the colour. This has no influence on the quality of the product. The effect will disappear under normal weather conditions.
Cleaning of tools:
Clean with water immediately after use.
General information
Storage:
Cool, but not freezing.
Shelf-life:
Can be stored for at least 12 months after date of filling (see additional sticker) if stored properly in the unopened original packaging.
Art.No. and description:
21 01 001 JONAS Allcolor Oxidrot
21 02 001 JONAS Allcolor Terracotta
21 03 001 JONAS Allcolor Mandarine
21 04 001 JONAS Allcolor Cognac
21 05 001 JONAS Allcolor Gold
21 06 001 JONAS Allcolor Sonnengelb
21 07 001 JONAS Allcolor Frühlingsgrün
21 08 001 JONAS Allcolor Oxidgrün
21 09 001 JONAS Allcolor Tannengrün
21 10 001 JONAS Allcolor Karminrot
21 11 001 JONAS Allcolor Bordeaux
21 12 001 JONAS Allcolor Aquablau
21 13 001 JONAS Allcolor Azur
21 14 001 JONAS Allcolor Ocker
21 15 001 JONAS Allcolor Oxidbraun
21 16 001 JONAS Allcolor Havanna
21 17 001 JONAS Allcolor Torf
21 18 001 JONAS Allcolor Gotikbraun
21 19 001 JONAS Allcolor Umbra
21 20 001 JONAS Allcolor Schiefer
21 21 001 JONAS Allcolor Schwarz
21 22 001 JONAS Allcolor Blau
21 23 001 JONAS Allcolor Violett
21 24 001 JONAS Allcolor Rot
21 25 001 JONAS Allcolor Orange
21 26 001 JONAS Allcolor Gelb
21 27 001 JONAS Allcolor Grün
Packaging:
10 l / 2.5 l / 750 ml / 250 ml
Ingredients acc. to VdL RL01:
Resin dispersion, pigment, calcium carbonate, silicate, water, additives, preservative: MIT, CIT/MIT (3:1).
Safety:
Please follow the instructions of the safety data sheet
Labelling:
This product is not classified according to EU regulation No 1272/2008 [CLP].
GISCODE:
BSW20
VOC content:
EU-Limit for the product Kat. A/a: 30 g/l (2010). This product contains < 1 g/l VOC.
Waste disposal:
Empty containers can be disposed for recycling. Any dried residues of material can be disposed of as construction waste or together with domestic garbage. Containers with liquid material residues must be disposed of according to local regulations. For further information, please contact your local waste authority.
Advice acc. to CLP:
Keep out of reach of children. Wear appropriate respiratory protection (full mask / half mask equipped with filter type A2/P2). Avoid eating, drinking and smoking during use of the product. Ensure good ventilation during and after application. In case of contact with eyes or skin, rinse immediately with plenty of water. Do not empty into drains or water courses. Contains: 2-Methyl-2H-isothiazol-3-on; CIT and MIT (3:1): 5-Chlor-2-methyl-2H-isothiazol-3-on and 2-Methyl-2H-isothiazol-3-on.
1,2-Benzisothiazol-3(2H)-on / 2-Methyl-2H-isothiazol-3-on. May produce an allergic reaction. Safety data sheet available on request. Advice for people suffering from isothiazolinone allergy under phone-no.: +49(0)2058/789-0.